English
Explosion-proof High Temperature Oven Featured Image
  • Explosion-proof High Temperature Oven

Explosion-proof High Temperature Oven

Short Description:

It is suitable for lithium-ion battery and battery core vacuum baking. Put the pole piece or battery core into the oven and set the required baking process time on the control panel, then press the start button. It is required that the equipment automatically complete vacuuming and nitrogen filling work.


Product Detail

FAQ

Product Tags

Specification

Explosion-proof high temperature oven suitable for lithium-ion battery and battery core vacuum baking

It is suitable for lithium-ion battery and battery core vacuum baking. Put the pole piece or battery core into the oven and set the required baking process time on the control panel, then press the start button. It is required that the equipment automatically complete vacuuming and nitrogen filling work.

12

Explosion-proof high temperature oven Characteristic

1. Continuous uninterrupted working time ≥1000h under the test condition of 140 °C;

2. Equipped with an explosion-proof pressure relief port, when the pressure increases sharply, the pressure relief port automatically opens;

3. The smoke flame sensor detects the smoke flame and fire extinguishing system to extinguish the fire in the box;

4. Explosion-proof safety design of the cabinet, equipped with explosion-proof chain, glass explosion-proof membrane, insulation layer using aluminum silicate insulation and insulation material;

13
Model ZHP-G-1000-DA ZHP-G-1800-DA ZHP-G-2520-DA ZHP-G-3600-DA ZHP-G-5000-DA ZHP-G-8000-DA
Temperature Temperature range RT+10℃~300℃
Temperature fluctuation ±0.5℃
Heating rate 25.0℃~100.0℃ within 8mins 6.0~10.0℃/min
Temperature uniformity ±2.0℃（25.0℃~100.0℃）
±2.5℃（100.1℃~200.0℃）
Material  Internal material Adopts 1.2mm thickness stainess steel(SUS#304)
Extermal material Adopts 1.2mm thickness Cold rolled steel sheet/powder spaying
Heat insulating material 100mm thickness mineral wool
Fan Centrifugal Blower
Heater Nickel chromium alloy heating wire
Size Inner size(mm)
W*H*D		 1000*1000*1000 1000*1500*1200 1200*1500*1400 1200*2000*1500 1500*1800*1850 2000*2000*2000
Outer size(mm)
W*H*D		 1200*1550*1450 1200*2000*1650 1400*2000*1850 1400*2350*1950 1700*2150*2300 2300*2450*2600
Volume(L) 1000L 1800L 2520L 3600L 5000L 8000L
Power Supply 380V AC 50/60Hz

Our services

Service timeliness:

When a fault report received from customer(including telephone, faxand email):Talents will respond within 4-8 hours (working time)，providesolutions and eliminate fault within 24-48 hours. After the equipmentguarantee period ended, supplier still has obligation to provide userswith technical support and after-sales service.

31

Pre-Sales

1.Technical consultation: test method, laboratory planning and suggestion.

2.Equipment selection: selection scheme, FAQ.

3.Product testing scheme.

32

In-Sales

  1. 1.Customer communication and progress report.
  2. 2.Guidance for pre-installation preparation,equipment commissioning and test run.
  3. 3.Calibration (when Third Party's verification is required)

 

33

After-Sales

  1. 1.Technical training: operation of equipment, daily maintenance,common fault diagnosis and troubleshooting.
  2. 2.Scheduled on-site service: Detection of problem as soon as possiblein order to eliminate equipment and anthropogenic hazards. This is toensure long term and stable equipment operation as well as delivery oflatest technical information.
  3. 3.Technical support: special paid services are provided according tocustomer's needs.
  • Previous:
  • Next:

    • Q1：How to get testing solution and quotation?

    A1：If your product requires environmental testing, please contact us to get testing solution and quotation. We will respond to your request within

            12 hours.

    Q2：How to contact us?

    A2：1.Phone: +886 976 590 796

            2. E-mail: sales@zh-talents.com

    Q3：How to place an order?

    A3：If all the details of the products are confirmed,we can draft a contact to you.Also you can send the PO to us by mail.

    Q4：How to deal with equipment problems and how to guarantee after-sales service?

    A4：If there is problem with the equipment, please contact us and we will reply within 12 hours and arrive at your site within 48 hours.

            We have after-sales service offices in Southeast Asia, Taiwan, Hong Kong and other places, and cooperative service providers in other regions.

    Q5：How is the product packaged and shipped through logistics?

    A5：1. Use export standard wooden boxes for packaging.

            2. Choose the most favorable transportation method. Sea freight, air freight, railway, truck transportation, and multimodal transportation.

            3. Fast delivery, some models are in stock and will be shipped in 1-3 days.

    Write your message here and send it to us

    Hot Products