Shock/Drop Measurement System
Specification
Shock measurement analyzer is specially used as a platform to capture shock wave capture and perform analysis. It is suitable for capturing, measurement and analysis of the normal and high impact event. It can meet ISO, GJB150, GJB360, GJB2423, MIL-STD-810 and other shock test standards and it is a professional tool for environmental shock testing, measurement and analysis.
|
Model |
ZH-ST-02 |
ZH-ST-05 |
|
|
Input |
Channel |
2 |
4，can be extended to 8/12/16 |
| Sampling frequency |
192Hz |
1MHz |
|
| Voltage range |
-10V~+10V |
||
| Coupled modes | AC, DC, ICP; built-in ICP constant current source, charge amplifier (1mV/ and 0.1mV/pc two ranges), compatible with TEDS sensors | ||
|
Output |
Channel |
1个 |
|
| Bandwidth |
for calibration only |
||
| Sampling frequency |
192KHz |
||
| Voltage range |
-10V~+10V |
||
|
General indicators |
Electricity supply |
AC220V |
|
| Power |
40W |
||
| Communication interface |
USB2.0 |
||
| Operating system |
Microsoft Windows 2000/XP |
||
| Support standards |
ISO,MIL-STD-810, or user defined |
||
|
Other indicators |
ADC Resolution ratio |
24（bit） |
16（bit） |
| Pulse width |
0.5~100msec |
0.1~100msec |
|
| Max. acceleration |
5000gn |
100，000gn |
|
| Dynamic range |
110dB |
80dB |
|
| Harmonic range |
< -95dB |
< -70dB |
|
| Signal noise ratio |
> -95dB |
> -70dB |
|
| Input type |
voltage, charge |
voltage |
|
| Frequency accuracy |
0.01% |
||
Our services
Pre-Sales
1.Technical consultation: test method, laboratory planning and suggestion.
2.Equipment selection: selection scheme, FAQ.
3.Product testing scheme.
In-Sales
- 1.Customer communication and progress report.
- 2.Guidance for pre-installation preparation,equipment commissioning and test run.
- 3.Calibration (when Third Party's verification is required)
After-Sales
- 1.Technical training: operation of equipment, daily maintenance,common fault diagnosis and troubleshooting.
- 2.Scheduled on-site service: Detection of problem as soon as possiblein order to eliminate equipment and anthropogenic hazards. This is toensure long term and stable equipment operation as well as delivery oflatest technical information.
- 3.Technical support: special paid services are provided according tocustomer's needs.
Q1：How to get testing solution and quotation?
A1：If your product requires environmental testing, please contact us to get testing solution and quotation. We will respond to your request within
12 hours.
Q2：How to contact us?
A2：1.Phone: +886 976 590 796
2. E-mail: sales@zh-talents.com
Q3：How to place an order?
A3：If all the details of the products are confirmed,we can draft a contact to you.Also you can send the PO to us by mail.
Q4：How to deal with equipment problems and how to guarantee after-sales service?
A4：If there is problem with the equipment, please contact us and we will reply within 12 hours and arrive at your site within 48 hours.
We have after-sales service offices in Southeast Asia, Taiwan, Hong Kong and other places, and cooperative service providers in other regions.
Q5：How is the product packaged and shipped through logistics?
A5：1. Use export standard wooden boxes for packaging.
2. Choose the most favorable transportation method. Sea freight, air freight, railway, truck transportation, and multimodal transportation.
3. Fast delivery, some models are in stock and will be shipped in 1-3 days.
