Walk-In Type Compound Salt Spray Test Chamber (Temperature, Humidity, Salt Spray, Dry, Wet)
Specification
Salt water concentration: 5% Sodium chloride solution, or add 0.26 g of copper chloride in a 5% sodium chloride solution per liter（CuCl2 2H2O）
Spray pressure：1.00±0.01kgf/cm2
Spraying amount：1.0~2.0ml/80cm2/h（collect 16 hours at least and take the average ）
Spraying amount viewer：4 pcs，installed around the test chamber
PH：6.5~7.2, 3.0~3.2
Spraying mode：Airflow spray mode, continuous or intermittent is optional, 1min~9999h, fixed value operation can be set arbitrarily, program running time can be set to cycle operation. The salt spray is provided by a compressed air line.
Pressure tank temperature：RT~+63℃（adjustable）
Salt spray chamber temperature range ：RT~+60℃（adjustable）
Drying test: when the temperature inside the test chamber is 50~70±2°C, the humidity is less than 30%, ±3%
Wetting test: when the temperature in the test chamber is 40~50±2°C, the humidity is greater than 93%, ±3%
Constant temperature and humidity test: temperature deviation ± 2 ° C when the temperature inside the test chamber is 50 ° C
Salt spray chamber temperature fluctuation：±1℃（no-load）
Salt spray chamber temperature uniformity：≤2℃（no-load）
Salt spray chamber heating rate：1℃/min（15℃~40℃），average non-linearity during whole process
Temperature overshoot：≤3℃
Humidity range：20%~97%
Humidity fluctuation：±3%（no-load）
Spraying amount direction：free direction
Internal volume：1m³-4m³-8m³-12m³-16m³-60m³-120m³（Customizable）
Salt spray chamber temperature range ：RT~+60℃（adjustable)
Pressure tank temperature：RT~+63℃（adjustable）
Temperature deviation：≤±2℃
Temperature deviation: ≤±2℃ when the temperature inside the test chamber is 50 ° C
Drying test: when the temperature inside the test chamber is 50~70±2°C, the humidity ≤ 30%, ±3%
Wetting test: when the temperature in the test chamber is 40~50±2°C, the humidity ≥ 93%, ±3%
Temperature overshoot：≤3℃
Humidity range：20%~97%
Humidity fluctuation：±3%（no-load）
Temperature fluctuation：±1℃
Temperature uniformity：≤2℃
Heating rate：≥1℃/min（15℃~40℃）
Spraying amount direction：free direction
Spray pressure：1.00±0.01kgf/cm2
Spraying amount：1.0~2.0ml/80cm2/h（collect 16 hours at least and take the average ）
PH：Neutral 6.5~7.2, , Acid 3.0~3.2
Spraying amount viewer：4 pcs
Spraying mode：Airflow spray mode, continuous or intermittent is optional
Internal volume：1m³-4m³-8m³-12m³-16m³-60m³-120m³（Customizable）
Walk-in Type Compound Salt Spray Test Chamber summary
This 60L Walk-in Type Compound Salt Spray Test Chamber is a machine that the testing condition is the closest to the natural environment,it simulated condition that more often meet at natural environment, and then deteriorated the natural environment to be tested, such as the salt spray, dry, wet, room temperature, low temperature environment,it can be tested in any order or individually tested.
1、temperature controller 0-99℃, liquid crystal type double digital display with P.I.D automatic calculation, control error ±1℃
2、Pressure air barrel temperature control 0-99℃, liquid crystal type double digital display with P.I.D automatic calculation, control error ±1℃
3、High-precision multi-function digital display timing controller 0.1S-9990hr (Zhejiang Julong)
4、Accumulator 0-99999 hr (Taiwan CamscoHM-1)
5、Relay (Japan Omron OMRON)
6、Spray solenoid valve (Japan KSD)
7、Air filter (AIRATC, Taiwan)
8、Pressure regulating valve (AIRATC, Taiwan)
Walk-in Type Compound Salt Spray Test Chamber Applicable Industry
This Walk-in Type Compound Salt Spray Test Chamber is tested the corrosion resistance capacity of products, which stay in the intense change environment, such as automobile parts, aviation equipment, photographic equipment, building materials, electricity, electrical and electronic systems.
Walk-in Type Compound Salt Spray Test Chamber Features
1.Salt spray test chamber With color touch screen LCD controller (Japan OYO U-8256P), which can record the testing curves.
2.Salt Spraying Test Chamber Control mode: temperature, humidity, temperature and humidity can do alternating control by the program.
3.Salt Spraying Test Chamber Program Group Capacity: 140Pattern (Group) 1400Step (above) each program can be set up to Repest99 segment.
4.Each executive mode time can be arbitrarily set 0-999 hours, 59 minutes.
5.Each group can be arbitrarily set the cycle of 1-999 .
6.Has the power memory function, recovery after power continue to perform the not completed the test.
7 . interface RS232 connect with computer.
Walk-in Type Compound Salt Spray Test Chamber Corresponding standard
1.GB/T 20854-2007 Dry and wet salt spray test
2.ISO14993-2001 Dry and wet salt spray test
|
Model |
Walk-In Type Compound Salt Spray Test Chamber |
|
Inner box volume |
1m³ ；4m³； 8m³； 12m³；16m³；60m³；120m³ （Customizable） |
|
Outer box volume |
Based on actual size |
|
Brine concentration |
Add 0.26g Copper(II) chloride per liter in the concentration of 5% sodium chloride solution or 5% sodium chloride solution |
|
Spray Pressure |
1.00±0.01kgf/cm² |
|
Salt mist settlement |
1.0~2.0ml/80cm²/h (Collect at least 16 hours and take the average value) |
|
PH value |
neutral 6.5-7.2、acidity 3.0-3.2 |
|
Spray method |
Airflow spray method, continuous, interval optional, 1min-9999h, fixed value, operation can be set arbitrarily, program operation time can be set to cycle operation, salt spray is provided through compressed air pipeline. |
|
Salt mist settling observer |
Quantity 4, each installed around the test chamber. |
|
Pressure barrel temperature |
room temperature~+63℃（adjustable） |
|
Temperature range of salt spray box |
room temperature~+60℃（adjustable） |
|
Drying test |
When the temperature inside the test chamber is 50-70 ± 2 ℃, the humidity is less than 30%, ± 3% |
|
Wet test |
When the temperature inside the test chamber is 40-50 ± 2 ℃, the humidity is greater than 93%, ± 3% |
|
Constant temperature and humidity test |
At a temperature of 50 in the test chamber, the temperature deviation is ± 2 ℃ |
|
Temperature fluctuation of salt spray box |
±1℃（At no load） |
|
Temperature uniformity of salt spray box |
≤2℃（At no load） |
|
Heating rate of salt spray box |
1℃/min(15℃~40℃),At no load |
|
Temperature Overshoot |
≤3℃ |
|
Humidity range |
20%~97% |
|
Humidity fluctuation |
±3%（At no load） |
|
Salt mist settling direction |
Free settlement |
Our services
Pre-Sales
1.Technical consultation: test method, laboratory planning and suggestion.
2.Equipment selection: selection scheme, FAQ.
3.Product testing scheme.
In-Sales
- 1.Customer communication and progress report.
- 2.Guidance for pre-installation preparation,equipment commissioning and test run.
- 3.Calibration (when Third Party's verification is required)
After-Sales
- 1.Technical training: operation of equipment, daily maintenance,common fault diagnosis and troubleshooting.
- 2.Scheduled on-site service: Detection of problem as soon as possiblein order to eliminate equipment and anthropogenic hazards. This is toensure long term and stable equipment operation as well as delivery oflatest technical information.
- 3.Technical support: special paid services are provided according tocustomer's needs.
Q1：How to get testing solution and quotation?
A1：If your product requires environmental testing, please contact us to get testing solution and quotation. We will respond to your request within
12 hours.
Q2：How to contact us?
A2：1.Phone: +886 976 590 796
2. E-mail: sales@zh-talents.com
Q3：How to place an order?
A3：If all the details of the products are confirmed,we can draft a contact to you.Also you can send the PO to us by mail.
Q4：How to deal with equipment problems and how to guarantee after-sales service?
A4：If there is problem with the equipment, please contact us and we will reply within 12 hours and arrive at your site within 48 hours.
We have after-sales service offices in Southeast Asia, Taiwan, Hong Kong and other places, and cooperative service providers in other regions.
Q5：How is the product packaged and shipped through logistics?
A5：1. Use export standard wooden boxes for packaging.
2. Choose the most favorable transportation method. Sea freight, air freight, railway, truck transportation, and multimodal transportation.
3. Fast delivery, some models are in stock and will be shipped in 1-3 days.
